|
 
Test & Measurement
Oscilloscopes
NZ$218.00*
  • 2 Channels + Arbitrary Waveform Generator
  • Bandwidth 10 MHz, Rise Time 35 ns,
  • Sampling Rate: 100 MS/s, Buffer Memory 8 kS
NZ$777.00*
  • Mixed signal output, 16 digital channels
  • 25MHz Bandwidth, 48kS Memory
  • 500 MS/s Sample Rate
NZ$777.00*
  • 4 Channels, AWG & Function Generator
  • 25 MHz Bandwidth, 48kS Memory
  • 500 MS/s Sample Rate
NZ$909.00*
  • 3203D: 2 Channels + External trigger & Function Generator
  • 50MHz Bandwidth, 2.5GS/s Sampling Rate (Max)
  • 64MS Buffer Memory, 8 bits Resolution, 12 bits Enhanced Resolution
NZ$1333.00*
  • 2 Channels + 16 Digital Channels + Arbitrary Waveform Generator
  • 50MHz Bandwidth, 2.5GS/s Sampling Rate (max)
  • 64MS Buffer Memory, 8 bits Resolution, 12 bits Enhanced Resolution
NZ$1353.00*
  • 3403D: 4 Channels + External Trigger & Function Generator
  • 50 MHz Bandwidth, 2.5GS/s Sampling Rate(Max)
  • 64 MS Buffer Memory
NZ$1773.00*
  • 4 Channels + 16 Digital Channels + Arbitrary Waveform Generator
  • 50 MHz Bandwidth, 2.5 GS/s Sampling Rate
  • 64 MS Buffer Memory
NZ$1293.00*
  • 4224: 2 Channels, 20 MHz Bandwidth
  • 80MS/s Sampling Rate
  • 32MS Buffer Memory,
NZ$1873.00*
  • 2 Channels + External trigger & Arbitrary Waveform Generator
  • 5 MHz Bandwidth, 10MS/s Sampling Rate
  • 16MS Buffer Memory, 16 bits Resolution, 20 bits Enhanced Resolution
NZ$2739.00*
  • 4 true differential inputs
  • Measure differential signals with a single channel
  • Choice of accessories for sensitive low-level, general electronic & 1000 V CAT III applications
NZ$1881.00*
  • For general electronic & 1000 V CAT III applications
  • Measure differential signals with a single channel
  • 4 true differential inputs
NZ$3625.00*
  • 8 channels
  • 20 MHz bandwidth
  • 256 MS buffer memory
NZ$1753.00*
  • 5242A: 2 Channels,Flexible resolution from 8 to 16 bits
  • 60MHz Bandwidth, 2.5 GS/s Sampling Rate
  • 16 MS Buffer Memory
NZ$4705.00*
  • 6402C: 4 Channels + AUX Input & Function Generator
  • 250MHz Bandwidth, 5 GS/s Sampling Rate
  • 256 MS Buffer Memory
NZ$13825.00*
  • 1 GHz Bandwidth, 4 Channels + AUX input & AWG
  • 1 Gs Buffer Memory, 5 GS/s Sampling Rate
  • With a PicoScope 6407 you can easily digitize a 1 GHz sine wave with a timing resolution of 200 ps
NZ$23685.00*
  • Two-channel sampling oscilloscope
  • 25 GHz electrical bandwidth
  • 5 ps/div to 3.2 ms/div range
Network Analysers
NZ$8565.00*
  • Professional and portable quad receiver with bias-Ts
  • Up to 118 dB dynamic range, < 0.005 dB RMS noise
  • Fully traceable 8 and 12 term calibration
Power Supplies
NZ$1332.00*
  • True Constant Voltage and Constant Current Performance
  • 12-bit D/A Converter
  • Backlit LCD - Voltage and Current are Displayed Simultaneously
Oscilloscope Probes
NZ$127.00*
  • A good quality general purpose oscilloscope probe
  • 1:1/10:1 Switchable, 20/150MHz Bandwidth
  • 400/600Vpk. 1.8/2.3ns Rise Time
NZ$266.00*
  • Attenuation = 1:100, Bandwidth = 300MHz
  • Maximum Voltage = 1500Vp, Rise Time = 1.2ns
  • One of two high voltage probes in the range. Both have enhanced BNC insulation.
NZ$314.00*
  • Attenuation = 1:100, Bandwidth = 300MHz
  • Maximum Voltage = 2500Vp, Rise Time = 1.2ns
  • The second of two high voltage probes in the range. Both have enhanced BNC insulation
NZ$367.00*
  • Attenuation = 1:10, Bandwidth = 350 MHz
  • Maximum Voltage = 600V, Rise Time = 1ns
  • With a 350MHz bandwidth, the 4011 is suitable for all but the very fastest Pico oscilloscope range
NZ$856.00*
  • Attenuation = 1:10, Bandwidth = 500 MHz
  • Maximum Voltage = 200V, Rise Time = 0.7ns
  • This high stability 500MHz probe has a smaller probe and is much easier to use on high density PCBs.
NZ$264.00*
  • Attenuation = 1:1, Bandwidth = 950 MHz
  • Maximum Voltage = 50V AC; 200V DC
  • A demodulating probe, the 7012 output is a DC voltage equal to the peak to peak value of the measured waveform
Oscilloscope Accessories
NZ$64.00*
  • General-purpose passive differential probe
  • Measuring voltages on ranges from ±10 mV to ±50 V
  • Used with the PicoScope 4444 only
NZ$350.00*
  • 1000 V CAT III, passive differential probe
  • 25:1 10 MHz voltage measurement
  • Used with the PicoScope 4444 only
NZ$592.00*
  • 40 A AC/DC, 300 V CAT III
  • 100 kHz current measurement
  • Used with the PicoScope 4444 only
NZ$381.00*
  • 200/2000 A AC/DC, 150 V CAT II
  • 20 kHz current measurement probe
  • Used with the PicoScope 4444 only
NZ$1153.00*
  • Flexible 3-phase switched-range 30/300/3000 A AC RMS
  • 1000 V CAT III, 10 Hz to 20 kHz current probe
  • Used with the PicoScope 4444 only
NZ$601.00*
  • Flexible single-phase switched-range 30/300/3000 A AC RMS
  • 1000 V CAT III, 10 Hz to 20 kHz current probe
  • Used with the PicoScope 4444 only
NZ$27.00*
  • Suitable for ground-referenced measurements
  • Essential when using the TA325 and TA326 current probes
  • Used with the PicoScope 4444 only
NZ$40.00*
  • Suitable for differential measurements using two single-ended probes
  • Used with the PicoScope 4444 only
NZ$187.00*
  • Hold the PicoConnect 4444 and its accessories
  • Portable
NZ$1073.00*
  • Up to 5 GHz bandwidth
  • Fits all SMA, K and PC3.5 50 Ω input ports
  • Less than 70 ps transition time
NZ$1693.00*
  • High-speed logic voltage applications
  • Less than 40 ps transition time
  • Suited to Ethernet, USB3, HDMI, SATA, PCI, LVD and other high-speed cabled, chip to chip and backplane interfaces
*15% GST applicable for sales within NZ