- The Advanced Kit builds on the standard kit to include more accessories
- Includes universal break out leads, fuse extensions, COP probes and extension leads
- Oscilloscope buffer memory has 250 Meg samples
Includes: PicoScope Automotive Software Our 4 Channel Advanced Kit is the ultimate in vehicle diagnostics. It builds on the 4 Channel Standard Kit by also including our most popular optional accessories such as universal break out leads, secondary ignition pickups and a 60 MHz oscilloscope probe. Pico Kits are designed to be used on any type, make and model of vehicle, without the need for expensive vehicle-specific harnesses or other add-ons. PicoScope Automotive software is supplied with all Pico kits. This feature rich software is capable of capturing even the most complex of waveforms, yet the intuitive controls and comprehensive reference library ensures that it’s both quick and easy to use. PicoScope Automotive software is free, there are no licence fees or annual subscriptions and updates can be downloaded at any time, free of charge. Which Diagnostics Kit is Right for Me?
Compare Kits
|
|
PicoScope Automotive Oscilloscope - 4 Channels - For measuring currents between 10 mA and 60 A
- Display current waveforms for fuel injectors and fuel pumps.
- Improved performance and diagnostic accuracy
PicoBNC+ 60A AC/DC current clamp - Allows you to measure up to 2000 amps without cutting, or disconnecting or stripping wires
- No batteries required
- Ranging is carried out automatically with no user switching required
PicoBNC+ 2000 A AC/DC current clamp - Fully shielded for the complete length of the signal cable
- 3 m leads come with fixed 1.5 m ground extensions
- Shrouded/stacking banana plugs
4x PicoBNC+ Premium Test Lead to 4mm, 3m - View secondary ignition waveforms directly on-screen with an Automotive Oscilloscope
- Shielded 1.8m lead. Clips over plug lead or COP extension
- This lead is fitted with a PicoBNC+ interface
4x PicoBNC+ secondary ignition pickup - 11 sets of 6 different sized universal breakout leads
- And a set of 6 back pinning probes.
- Designed with the ability to clip together into a single block for ease of handling
Premium 6-way breakout lead set - Measures in the range -40° to 125°
- Enclosed in a 5mm stainless steel housing to provide contact and airflow measurement.
- Available only for PicoBNC+
PicoBNC+ Temperature probe (wide-range linear) - Enables voltage readings from numerous 2 pin sensors in the engine compartment
- Separate access to individual wires allows easy current measurement with clamps
- Simultaneously display both injector current and voltage on your PicoScope
TA012 Two Pin Break Out Lead - The breakout cable gives access to the individual wires to allow probing with current clamps.
2-pin ACS connector breakout lead - Maxi fuse extender keeps fuse in circuit while testing.
- Allows easy (clamp) current measurement.
- Simply move fuse to extension, plug in extension where fuse was & clamp to measure
Fuse Extension Lead - Maxi - JCase fuse extender keeps fuse in circuit while testing.
- Allows easy current (clamp) measurement.
- Simply move fuse to extension, plug in extension where fuse was & clamp to measure.
Fuse Extension Lead - JCASE - ATC /ATO fuse extender keeps fuse in circuit while testing
- Allows easy current (clamp) measurement.
- Simply move fuse to extension, plug extension in where fuse was and clamp to measure
Fuse Extension Lead - Std ATC/ATO - Mini ATC fuse extenders keep fuse in circuit while testing.
- Allows easy (clamp) current measurement.
- Simply move fuse to extension, plug extension in where fuse was and clamp to measure.
Fuse Extension Lead - Mini-ATC - These probes have a fixed x10 attenuation and are intended for high-speed signals
- Automatically recognised by PicoScope software when connected to the scope.
2x BNC+ 10:1 scope probe & adaptor - Displays scope patterns of the secondary, faster than scoping the primary
- Flexible design allows for easier access to hard-to-reach components
- No batteries required
PicoBNC+ COP and signal probe - Brand-new lead and offers dynamic measurement of resistance
- Can be used to test diodes, in addition to resistance measurements.
- Has a total lead length of 2m in a Y configuration
BNC+ resistance test lead - Set of 4 extensions for cartridge coil packs
- Clip Pico secondary ignition lead over extension to see HT waveform
- Simply fit between coil pack & plugs
Coil-on-Plug Extension Leads - Set of 4 - Back pinning probe set
- Fit onto 4mm banana plugs, fine tips slide easily past connector seals
- 7 complete acupuncture probes, 3 probe sizes, replacement screws & needles
TA008 Acupuncture Back Pinning Probe Set - Designed for back-probing under the insulation
- Flexible mid-section improves access to difficult terminals
- Fits easily onto Pico Premium Test Leads
Flexible Back Pinning Probe (4x Red, 4x Black) - When a quick non-clip-on connection is required
- Pushes easily onto a Pico Premium Test Lead
- 4mm socket, length 115mm. Also available in black
Multimeter Probe (2x Red, 2x Black) - Fully insulated with 4mm socket in the handle
- Toothed grip offers good contact on fine wire
- Easy connection to Pico Premium Test Leads
Small Crocodile / Gator Clip (2x Red, 2x Black) - Fully insulated with a 4 mm socket in the handle
- Easy connection to Pico Premium test lead
- Wide 30 mm opening jaw
Large Dolphin/Gator Clip (1x Red, 1x Black) - Adapts 4mm shrouded plug to unshrouded plug
- Allows test lead connection into any breakout box
- Quick push-on connection
4x Shrouded to Unshrouded Adaptor - Makes it easy to keep test leads tidy in the engine bay
- Hang PicoScope up by its boot loop
- 100 mm long, plastic coated with rubber caps
- Fits all our BNC to 4 mm Pico Premium Test Leads
- Plier type clips designed to grab and hold the vehicle battery terminals
Battery Clip (2x Red, 2x Black) - Prove the correct operation of each of the ultrasonic parking sensors
- Directly showing the strength of the signal from a given sensor
- 2m long lead
Ultrasonic parking sensor detector - Connect PicoScope to PC
- Scope power and high signal rating
- Compatible with USB2 PCs
USB Cable - Vsn 3.1 Gen 1, 1.8m - Ensure reliable signal and power connections between your PC and PicoScope.
- Longer lead provides more flexibility to your workstation.
USB Cable - Vsn 2.0, 4.5m
|
