subcategories

*15% GST applicable for sales within NZ

TC08 Single Channel Terminal Board
  • Allows connection of a 0-50mV, 0-500mV, 0-5 VDC, or 4-20 mA signal
PT104 Single Channel Screw Terminal Adaptor
  • Use for:
  • Connection of plug-less PT100 Probes
  • 4-wire Resistance Measurement: 0-375 or 10kΩ
PicoLog PC Hosted Data Logger
  • 12 input channels
  • Data acquisition software and SDK included
  • Up to 1MS/s sample rate
TC08 PC Hosted Thermocouple Logger
  • 8 Channel Thermocouple Data Logger
  • Measures from -270 to +1820°C
  • Automatic Cold Junction Compensation
Picolog 1000 Series I/O Board
  • Easily and quickly connect your sensors to the logger
  • Solder pads on which you can fit resistors
  • Widen the measuring range for each input
HHK160 Penetration Probe
  • Sharp point allows easy penetration for taking internal temperatures
  • Response time < 3 seconds
  • K-Type thermocouple - Max temperature 250°C, 3.3 x 130mm
Multi-use Temperature Logger
  • Automatic PDF report generation
  • Built in USB port
  • LCD displays all relevant information
PT104 4-Channel Data Logger
  • Measures temperature, resistance and voltage
  • 4-channel temperature logging
  • Supports 2,3 and 4-wire Sensors
ADC20-24 Screw Terminal I/O Board
  • Included with the ADC20 and ADC24 data loggers
  • Easy screw terminal adaptor
  • Allows you to quickly connect and disconnect different sensors
HHK000 Surface Probe
  • Spring-loaded sensing tip provides positive surface pressure
  • Response time < 2 seconds
  • K-Type thermocouple - Max temperature 250°C, 6 x 130mm
Thermocouple ThermaData logger
  • For high temperature applications
  • Wide temperature range -100 to 1372°C
  • Water resistant housing offers IP65 protection
Precision Data Logger
  • 20 bit Resolution
  • Accurate to within 0.2%
  • 4 differential / 8 single-ended channels
HHK020 Heavy Duty Surface Probe
  • High temperature probe - Ideal for weld temperatures
  • Response time < 1 second
  • K-Type thermocouple - Max 1000°C, 12 x 130mm
SE014 PT100 Immersion Probe
  • Temperature range -75 to 250°C
  • Accuracy at 0°C: ±0.15°
  • Dimensions: 3.30 x 120mm
HHK028 Right Angled Surface Probe
  • High temperature weld temperatures
  • Response time < 1 second
  • K-Type thermocouple - Max 1000°C, 12 x 130mm
HHK040 Pipe Clamp Probe
  • Ideal for HVACR pipe work
  • Response time < 2 seconds
  • K-Type thermocouple - Maximum probe temperature 100°C. For pipe diameters from 6 to 30mm.
HHK044 Ribbon Surface Probe
  • Ideal for stationary, hard or metallic surfaces, as small as 8mm
  • Response time < 0.5 seconds
  • K-Type thermocouple - Max 250°C, 8 x 130mm
HHK060 Rigid Between Pack Probe
  • Designed specifically to slide easily between packets or boxes of produce
  • Response time < 3 seconds
  • K-Type thermocouple - Max 250°C, 4.5 x 130mm
HHK080 Velcro Pipe Probe
  • Wrap-around probe suitable for the temperature measurement of medium and large pipes in the HVACR & process industries
  • Pipes up to 150mm diameter
  • K-Type thermocouple - Max 100°C, 20 x 500mm
Needle Penetration Probe
  • Suitable for liquids and soft or semi-solid food, soft rubber & plastic
  • Response time < 2 seconds
  • K-Type thermocouple - Max 250°C, 1.8 x 130mm
HHK116 Heavy Duty Chisel Point Probe
  • Heavy Duty probe with T-Bar handle
  • Response time < 10 seconds
  • K-Type thermocouple - Max 250°C, 4.5 x 130mm
HHK117 Heavy Duty Penetration Probe
  • For denser materials, raw food products and harder rubber
  • Response time < 4 seconds
  • K-Type thermocouple - Max 250°C, 4 x 130mm
HHK120 Asphalt Probe
  • Long heavy duty penetration probe with T-Bar handle
  • Reduced sensing tip diameter for response time < 10 seconds
  • K-Type thermocouple - Max 250°C, 6.35 x 300mm
High Temperature Mineral Insulated Probe
  • Mineral insulation affords probe flexibility & high temperature range
  • Response time < 2 seconds
  • K-Type thermocouple - 1.5 x 130mm
HHK240 Binder Probe
  • Rounded tip allows insertion through self-sealing binder glands in fluid filled pipes, vessels and radiators
  • Response time < 3 seconds
  • K-Type thermocouple, -75 ~ 250°C, 3.0 x 130mm
HHK300 Air/Gas/Hot Water Probe
  • For HVACR, Viticulture air and Aged/Infant care hot water measurements
  • Fast respose time < 0.5 seconds
  • K-Type thermocouple, -75 ~ 250°C, 4.5 x 130mm
HHK745 Burger Probe
  • Designed for use in busy fast food kitchens
  • Stainless steel foot ensures consistently correct 6mm insertion depth
  • K-Type thermocouple, -75 ~ 250°C, 4.5 x 130mm with 1.0 x 6.0mm tip
HHK016 Magnetic Probe
  • Measure & monitor ferrous metal surface temperatures e.g. heat exchangers and radiators
  • Response time < 20 seconds
  • K-Type thermocouple, -20 ~ 150°C, 1m cable, 20mm diameter magnet
HHK362 Exposed Junction Bead Probe
  • Measure or monitor fridges, freezers, ovens, water, air & curing concrete
  • Response time < 0.5 seconds
  • K-Type thermocouple, -60 ~ 250°C, 1m or custom lengths
  • 1.5mm x 1000mm or talk to us about custom lengths
TPK01 Bead Probe
  • Fast bead probe with easy-grip cable tidy handle
  • Use with full length, or as wrapped stub air probe
  • K-Type thermocouple, -60 ~ 250°, 1m
SE011 General Purpose PT100 Probe
  • Temperature range -30 to 200°C
  • Accuracy at 0°C: ±0.15°
  • Dimensions (Excl. handle): 6 x 150mm
  • Compatible with PT104
SE012 High Accuracy PT100 Immersion Probe
  • Temperature range -50 to 250°C
  • Accuracy at 0°C: ±0.03°
  • Dimensions: 4 x 150mm
  • Compatible with PT104
SE015 PT100 Insertion Probe
  • Temperature range -75 to 250°C
  • Accuracy at 0°C: ±0.15°
  • Dimensions (Excl. handle): 3.30 x 120mm
  • Compatible with PT104
SE016 Heavy Duty PT100 Insertion Probe
  • Temperature range -150 to 650°C
  • Accuracy at 0°C: ±0.15°
  • Dimensions (Excl. handle): 4 x 150mm
  • Compatible with PT104
SE017 Fast Response PT100 Air Probe
  • Temperature range -75 to 250°C
  • Accuracy at 0°C: ±0.15°
  • Dimensions (Excl. handle): 3.30 x 120mm
  • Compatible with PT104
SE018 High Temperature PT100 Air Probe
  • Temperature range -150 to 650°C
  • Accuracy at 0°C: ±0.15°
  • Dimensions (Excl. handle): 4 x 150mm
  • Compatible with PT104
SE019 Economy PT100 Probe
  • Temperature range -75 to 260°C
  • Accuracy at 0°C: ±0.15°
  • Dimensions (Excl. handle): 3 x 120mm
  • Compatible with PT104
Real Time GSM Logger
  • Temperature, humidity, light, shock, tilt & location logging
  • Up to 120 days of 10 minute readings on internal rechargeable battery
  • Use external power supply for unlimited recording
  • Holds 50 000 readings in internal memory & unlimited via Cloud Subscription
  • 4G worldwide connectivity with 2G fallback