logo
Back to Products
subcategories

*15% GST applicable for sales within NZ

view product
PicoScope 2000 Series
  • 2 Channels + Arbitrary Waveform Generator
  • Bandwidth 10 MHz, Rise Time 35 ns,
  • Sampling Rate: 100 MS/s, Buffer Memory 8 kS

$312.00*

S1021 Oscilloscope Probe
  • A good quality general purpose oscilloscope probe
  • 1:1/10:1 Switchable, 20/150MHz Bandwidth
  • 400/600Vpk. 1.8/2.3ns Rise Time

$127.00*

view product
PicoVNA Vector Network Analyser
  • 300 kHz to 6 GHz operation
  • Up to 124 dB dynamic range at 10 Hz bandwidth
  • 0.005 dB RMS trace noise at maximum bandwidth of 140 kHz

$13208.00*

V6021 Oscilloscope Probe
  • Attenuation = 1:100, Bandwidth = 300MHz
  • Maximum Voltage = 1500Vp, Rise Time = 1.2ns
  • One of two high voltage probes in the range. Both have enhanced BNC insulation.

$266.00*

V6041 Oscilloscope Probe
  • Attenuation = 1:100, Bandwidth = 300MHz
  • Maximum Voltage = 2500Vp, Rise Time = 1.2ns
  • The second of two high voltage probes in the range. Both have enhanced BNC insulation

$314.00*

H4011 Oscilloscope Probe
  • Attenuation = 1:10, Bandwidth = 350 MHz
  • Maximum Voltage = 600V, Rise Time = 1ns
  • With a 350MHz bandwidth, the 4011 is suitable for all but the very fastest Pico oscilloscope range

$367.00*

M5001 Oscilloscope Probe
  • Attenuation = 1:10, Bandwidth = 500 MHz
  • Maximum Voltage = 200V, Rise Time = 0.7ns
  • This high stability 500MHz probe has a smaller probe and is much easier to use on high density PCBs.

$856.00*

PicoConnect 441 differential 1:1 probe
  • General-purpose passive differential probe
  • Measuring voltages on ranges from ±10 mV to ±50 V
  • Used with the PicoScope 4444 only

$92.00*

DR7012 Oscilloscope Probe
  • Attenuation = 1:1, Bandwidth = 950 MHz
  • Maximum Voltage = 50V AC; 200V DC
  • A demodulating probe, the 7012 output is a DC voltage equal to the peak to peak value of the measured waveform

$264.00*

PicoConnect 442 1000 V CAT III 25:1 differential probe
  • 1000 V CAT III, passive differential probe
  • 25:1 10 MHz voltage measurement
  • Used with the PicoScope 4444 only

$374.00*

TA300 current probe 40 A AC/DC D9 connector
  • 40 A AC/DC, 300 V CAT III
  • 100 kHz current measurement
  • Used with the PicoScope 4444 only

$674.00*

TA301 current probe 200/2000 A AC/DC D9 connector
  • 200/2000 A AC/DC, 150 V CAT II
  • 20 kHz current measurement probe
  • Used with the PicoScope 4444 only

$408.00*

TA325 Flex current probe 3-phase 30/300/3000 A AC BNC
  • Flexible 3-phase switched-range 30/300/3000 A AC RMS
  • 1000 V CAT III, 10 Hz to 20 kHz current probe
  • Used with the PicoScope 4444 only
  • 3 x TA271 D9-BNC Adaptors required

$1470.00*

TA326 Flex current probe 30/300/3000 A AC BNC
  • Flexible single-phase switched-range 30/300/3000 A AC RMS
  • 1000 V CAT III, 10 Hz to 20 kHz current probe
  • Used with the PicoScope 4444 only

$698.00*

D9-BNC adaptor
  • Suitable for ground-referenced measurements
  • Essential when using the TA325 and TA326 current probes
  • Used with the PicoScope 4444 only

$39.00*

view product
PicoScope 3000E
4 Channel Oscilloscope Kits
  • 3417E: 4 Channels
  • 350 MHz with 5 GS/s
  • 10 bit resolution (up to 14 bit with Enhanced Resolution)

$6743.00*

D9-dual BNC adaptor
  • Suitable for differential measurements using two single-ended probes
  • Used with the PicoScope 4444 only

$56.00*

PicoScope 4444 carry case
  • Hold the PicoConnect 4444 and its accessories
  • Portable

$239.00*

PicoConnect RF, microwave and pulse passive probe
  • Up to 5 GHz bandwidth
  • Fits all SMA, K and PC3.5 50 Ω input ports
  • Less than 70 ps transition time

$1228.00*

PicoConnect gigabit passive probe
  • High-speed logic voltage applications
  • Less than 40 ps transition time
  • Suited to Ethernet, USB3, HDMI, SATA, PCI, LVD and other high-speed cabled, chip to chip and backplane interfaces

$2545.00*

PicoScope 6000E Series MSO pod, 8 channels
  • 8 digital inputs per pod
  • 500 MHz bandwidth, 1 Gb/s
  • 5 GS/s sampling on 16 digital channels

$1373.00*

A3136 1.3 GHz active oscilloscope probe
  • High input impedance up to 1.3 GHz
  • input resistance of 1 MΩ
  • capacitance of 0.9 pF

$2714.00*

A3076 750 MHz active oscilloscope probe
  • High input impedance up to 750 MHz
  • Input resistance of 1 MΩ
  • Capacitance of 0.9 pF

$2193.00*

view product
PicoScope 4000 High-resolution deep-memory oscilloscope
  • 2 channels (4 & 8 channels also available)
  • 20 MHz bandwidth
  • 256 MS capture memory

$1711.00*

P2056 passive oscilloscope probe: 500 MHz
  • 500 MHz Bandwidth

$794.00*

P2036 passive oscilloscope probe: 300 MHz
  • 300 MHz Bandwidth

$649.00*

view product
PicoScope 4262 16-bit high-resolution oscilloscope
  • 2 Channels + External trigger & Arbitrary Waveform Generator
  • 5 MHz Bandwidth, 10MS/s Sampling Rate
  • 16MS Buffer Memory, 16 bits Resolution, 20 bits Enhanced Resolution

$2545.00*

view product
PicoScope 4444 kit
  • Ideal for use in non-ground referenced measurements

$3245.00*

view product
PicoScope 4444 Oscilloscope
  • 4 fully differential high-impedance inputs
  • Measure differential signals with a single channel
  • Choice of accessories for sensitive low-level, general electronic & 1000 V CAT III applications

$2690.00*

view product
PicoScope 5000 Series
  • 2 Channels
  • Flexible resolution from 8 to 16 bits
  • 60 MHz analog bandwidth

$2497.00*

view product
PicoScope 6000E Series
  • 4 channels
  • 300MHz bandwidth
  • 8-bit resolution

$9638.00*

view product
PicoScope 9400 Series
  • 2 channels
  • 5GHz bandwidth
  • 250 KS Memory

$21989.00*

view product
PicoScope 9300 Series
  • 2 channels
  • 20GHz bandwidth
  • Integrated TDR/TDT (60 ps / 2.5 to 7 V)

$40419.00*

Metermaster Technologies Limited

1st Floor, 180J Great South Rd
Takanini, Auckland 2112

+64 9 296 7601

info@metermaster.co.nz

Main Menu
Our Services
Legal

Free Phone from within New Zealand:
0800 METERS (0800 638 377)

Copyright © 2006 - 2025 Metermaster Technologies. All rights reserved.