|
Products
 ›
Accessories
|
My Order
|
Login
|
Register
|
Items per page:
Reset Selection
Order
NZ$59.00*
PE03 General Purpose pH Electrode
  • Wide epoxy body for strength
  • General lab use, economic electrode
  • 12.3 x 160mm
Order
NZ$67.00*
PE11 General Purpose pH Electrode
  • Narrow epoxy body for smaller beakers
  • Shorter to minimise tipping risk
  • 10 x 128mm
Order
NZ$103.00*
PE06HD Spear Tipped pH Electrode
  • Spear tipped for penetration measurement in cheese, meats, soil
  • Perfect (easy-clean) for sushi
  • 12 x 160mm with fine spear-shaped tip
Order
NZ$11.00*
Soft Padded Case for CA40
  • Soft anti-scratch liner
  • Internally padded. Velcro secured flap
  • 240(L) x 90(W) x 34mm
Order
NZ$59.00*
PE12 Electrode Head
  • Replacement electrode & thermistor head for PH222 pH Meter
  • Quick and easy swap-over
  • Positive push-on, with screw-ring retainer
Order
NZ$40.00*
  • 10 x pH4 Buffer Capsules
  • Easy pH meter calibration
  • Simply mix into 100ml of distilled water
Order
NZ$26.00*
Soft Clampmeter Carry Case
  • Soft anti-scratch liner with internal pocket for test leads
  • Secure zip fastener & external carry tab
  • 330(L) x 140(W) x 50mm - For 2600 & 3600 series clamps
Order
NZ$41.00*
Insulation Test Lead for 3604
  • Insulation test probe for 3604
  • In-probe button activates insulation test
  • Use in conjunction with the red test lead and clip
Order
NZ$48.00*
TP07 Temperature Probe for PH207
  • Use with PH207 pH meter for automatic temperature compensation
  • Also compatible with PH208, PH209YK, PH221 and WA2000 Series
  • 110 x 4mm (+handle), 0~60°
Order
NZ$43.00*
4213 Premium Test Lead Pair
  • 4mm stackable plug with retracting shroud, 2mm probe tip
  • 1.5m x 1.5mm silicon insulated cable
  • 25 Amp, 600V CAT III rating
Order
NZ$35.00*
2353 100 Red/Black Patchcord Pair
  • 4mm shrouded plugs
  • Right angled to straight
  • 1m x 1.5mm silicon insulated, 25 Amp, 1000V CAT III rating
Order
NZ$12.00*
  • Easy grip with anti-slip guard
  • 19 x 2mm probe tip
  • 36 Amp, 1000V CAT III rating
Order
NZ$11.00*
  • Safer when testing around bus bars
  • Very fine needle probe
  • 16 Amp, 1000V CAT III rating
Order
NZ$16.00*
3034 Spade Adaptor Pair
  • Better than crushing your test leads
  • Easy-positive connection,Grooved for 4.3 & 6.3 mm bolts
  • 36 Amp, 33VAC, 70VDC rating
Order
NZ$26.00*
  • Very fine 0.7mm sprung tip
  • Non-slip removable tip shroud
  • 1 Amp, 600V CAT III rating
Order
NZ$45.00*
  • Spring tension holds and pierces
  • Excellent for loom tests
  • 6 Amp, 30VAC, 60VDC rating
Order
NZ$28.00*
  • Holds well - even on very small pins
  • Rotatable pincers minimise test lead pull
  • Tested to 8000V! 6 Amp, 1000V CAT III rating
Order
NZ$32.00*
  • Wide opening jaws & very positive grab
  • Insulated jaw backs prevent accidental shorts
  • Tested to 8000V! 6 Amp, 1000V CAT III rating
Order
NZ$31.00*
5004 Large Crocodile Clip Pair
  • Large 20mm bite & good strong grip
  • 3 nose teeth hold small conductors too
  • 20 Amp, 1000V CAT III rating
Order
NZ$43.00*
4413 Red/Black Test Lead Pair
  • 4mm right angled shrouded plug, 2mm probe tip
  • 1.5m x 1.5mm silicon insulated cable
  • 25 Amp, 1000V CAT III, 600V CAT III rating
Order
NZ$127.00*
S1021 Oscilloscope Probe
  • A good quality general purpose oscilloscope probe
  • 1:1/10:1 Switchable, 20/150MHz Bandwidth
  • 400/600Vpk. 1.8/2.3ns Rise Time
Order
NZ$266.00*
V6021 Oscilloscope Probe
  • Attenuation = 1:100, Bandwidth = 300MHz
  • Maximum Voltage = 1500Vp, Rise Time = 1.2ns
  • One of two high voltage probes in the range. Both have enhanced BNC insulation.
Order
NZ$314.00*
V6041 Oscilloscope Probe
  • Attenuation = 1:100, Bandwidth = 300MHz
  • Maximum Voltage = 2500Vp, Rise Time = 1.2ns
  • The second of two high voltage probes in the range. Both have enhanced BNC insulation
Order
NZ$367.00*
H4011 Oscilloscope Probe
  • Attenuation = 1:10, Bandwidth = 350 MHz
  • Maximum Voltage = 600V, Rise Time = 1ns
  • With a 350MHz bandwidth, the 4011 is suitable for all but the very fastest Pico oscilloscope range
Order
NZ$856.00*
M5001 Oscilloscope Probe
  • Attenuation = 1:10, Bandwidth = 500 MHz
  • Maximum Voltage = 200V, Rise Time = 0.7ns
  • This high stability 500MHz probe has a smaller probe and is much easier to use on high density PCBs.
Order
NZ$264.00*
DR7012 Oscilloscope Probe
  • Attenuation = 1:1, Bandwidth = 950 MHz
  • Maximum Voltage = 50V AC; 200V DC
  • A demodulating probe, the 7012 output is a DC voltage equal to the peak to peak value of the measured waveform
Order
NZ$118.00*
HHK160 Penetration Probe
  • Sharp point allows easy penetration for taking internal temperatures
  • Response time < 3 seconds
  • K-Type thermocouple - Max temperature 250°C, 3.3 x 130mm
Order
NZ$131.00*
HHK000 Surface Probe
  • Spring-loaded sensing tip provides positive surface pressure
  • Response time < 2 seconds
  • K-Type thermocouple - Max temperature 250°C, 6 x 130mm
Order
NZ$141.00*
HHK020 Heavy Duty Surface Probe
  • High temperature probe - Ideal for weld temperatures
  • Response time < 1 second
  • K-Type thermocouple - Max 1000°C, 12 x 130mm
Order
NZ$187.00*
HHK028 Right Angled Surface Probe
  • High temperature weld temperatures
  • Response time < 1 second
  • K-Type thermocouple - Max 1000°C, 12 x 130mm
Order
NZ$73.00*
HHK040 Pipe Clamp Probe
  • Ideal for HVACR pipe work
  • Response time < 2 seconds
  • K-Type thermocouple - Maximum probe temperature 100°C. For pipe diameters from 6 to 30mm.
Order
NZ$122.00*
HHK044 Ribbon Surface Probe
  • Ideal for stationary, hard or metallic surfaces, as small as 8mm
  • Response time < 0.5 seconds
  • K-Type thermocouple - Max 250°C, 8 x 130mm
Order
NZ$136.00*
HHK060 Rigid Between Pack Probe
  • Designed specifically to slide easily between packets or boxes of produce
  • Response time < 3 seconds
  • K-Type thermocouple - Max 250°C, 4.5 x 130mm
Order
NZ$104.00*
HHK080 Velcro Pipe Probe
  • Wrap-around probe suitable for the temperature measurement of medium and large pipes in the HVACR & process industries
  • Pipes up to 150mm diameter
  • K-Type thermocouple - Max 100°C, 20 x 500mm
Order
NZ$138.00*
  • Suitable for liquids and soft or semi-solid food, soft rubber & plastic
  • Response time < 2 seconds
  • K-Type thermocouple - Max 250°C, 1.8 x 130mm
Order
NZ$171.00*
HHK116 Heavy Duty Chisel Point Probe
  • Heavy Duty probe with T-Bar handle
  • Response time < 10 seconds
  • K-Type thermocouple - Max 250°C, 4.5 x 130mm
Order
NZ$128.00*
HHK117 Heavy Duty Penetration Probe
  • For denser materials, raw food products and harder rubber
  • Response time < 4 seconds
  • K-Type thermocouple - Max 250°C, 4 x 130mm
Order
NZ$149.00*
HHK120 Asphalt Probe
  • Long heavy duty penetration probe with T-Bar handle
  • Reduced sensing tip diameter for response time < 10 seconds
  • K-Type thermocouple - Max 250°C, 6.35 x 300mm
Order
NZ$139.00*
  • Mineral insulation affords probe flexibility & high temperature range
  • Response time < 2 seconds
  • K-Type thermocouple - 1.5 x 130mm
Order
NZ$128.00*
HHK240 Binder Probe
  • Rounded tip allows insertion through self-sealing binder glands in fluid filled pipes, vessels and radiators
  • Response time < 3 seconds
  • K-Type thermocouple, -75 ~ 250°C, 3.0 x 130mm
Order
NZ$113.00*
HHK300 Air/Gas/Hot Water Probe
  • For HVACR, Viticulture air and Aged/Infant care hot water measurements
  • Fast respose time < 0.5 seconds
  • K-Type thermocouple, -75 ~ 250°C, 4.5 x 130mm
Order
NZ$155.00*
HHK745 Burger Probe
  • Designed for use in busy fast food kitchens
  • Stainless steel foot ensures consistently correct 6mm insertion depth
  • K-Type thermocouple, -75 ~ 250°C, 4.5 x 130mm with 1.0 x 6.0mm tip
Order
NZ$84.00*
HHK016 Magnetic Probe
  • Measure & monitor ferrous metal surface temperatures e.g. heat exchangers and radiators
  • Response time < 20 seconds
  • K-Type thermocouple, -20 ~ 150°C, 1m cable, 20mm diameter magnet
Order
NZ$19.00*
HHK362 Exposed Junction Bead Probe
  • Measure or monitor fridges, freezers, ovens, water, air & curing concrete
  • Response time < 0.5 seconds
  • K-Type thermocouple, -60 ~ 250°C, 1m or custom lengths
  • 1.5mm x 1000mm or talk to us about custom lengths
Order
NZ$24.00*
TPK01 Bead Probe
  • Fast bead probe with easy-grip cable tidy handle
  • Use with full length, or as wrapped stub air probe
  • K-Type thermocouple, -60 ~ 250°, 1m
Order
NZ$29.00*
TS10 Shrouded Test Lead Pair
  • Shrouded right angled plugs
  • Compatible with 4mm shrouded meter sockets
  • 1m long with safety sleeved tips
Order
NZ$42.00*
TL8000 Interchangeable Test Lead Set
  • Short & long insulated tips plug into probe end
  • Shrouded alligator clips plug into probes, or directly into meter
  • Right angled shrouded plugs on probe & alligator clip leads
Order
NZ$203.00*
  • 0 to 60 Amps DC & AC @ 40Hz to 20kHz
  • Use with your DMM on Volts range to measure with 10mA resolution
  • Easy push-button Zero Set. 4mm Banana connectors on convenient curly cord.
Items per page:
*15% GST applicable for sales within NZ
Top of Page